Winter...hmmm

Well I don't know about you but we got hammered by cold that has me frozen indoors looking at a few of the old Melobar parts I have still on the shelves.
I think I'll break down and build the two CC-8 CNC bodies I've been saving in mahogany and ash - probably with Lollar pickups.  If I can find a decent painter...I'm getting too old to do that part. I hope to get a Black Melobar Skreemr done, last couple of CC-8s, a Teleratt SXL and maybe...maybe, a Telobar double neck using the custom Tele with the dual p90s, I'm just not sure if I want to make the Melobar neck a 6 or 8 string on the bottom...we'll see

Ladies hot on lap steel

  Megan Lovell of the band Larkin Poe

                                                              And of course Cindy Cashdollar ...

Great shot sent in by Arlen Roth

Dad really enjoyed Arlen Roth, great shot Arlen sent in this week

Melobro Model 17 SOLD

Wish I could keep this one - huge sound and cool gloss black

Melobro Model XVII
Fiber matt laid with resin pounded into the fiber for elongation so the sound travels similar to wood grain but huge bite in sound tone. Note that most Dobros are plywood tops so the top isn't really where the sound is generated.
The Fiber and Resin give huge strength so there is not a sound well but an open sound chamber - the Raybay fan holes are open in the entire upper bout allowing a lot of acoustic sound from the open chamber out. The back is arched like a 335 Gibson to allow a neck through design going from the Neck block through to the tail block for added sustain. On that neck through design suspended in the sound chamber are Rosewood sound baffles thinned and sound tapped for the best added wood tone along with the bite of the fiber and resin tone.

 you can see the wood baffles inside reflecting upward driving the sound out of the chamber over the tone woods. There is another one internally under the cone designed for more of an acoustic flavor on the treble side of the cone.

 

The Neck is solid Mahogany with one lamination at the very bottom of the heel block to avoid wasting half the wood blank. The one problem with this guitar is after I got it built I spotted a lamination scar on the other side of the neck away from the player shown here.

 I'm not going to tear the guitar down and repaint that little area but discount it and sell it as used.

The Head is the NS design with Chrome 102C Grover keys.

Fingerboard is Indian Rosewood from Beard

Quarterman cone from Beard with a #14 Spider

Bone nut / Maple with Ebony capped Saddles

Beard Special 28's for strings

25" scale

New Hardshell Case included

 

Normally I used to ask $1,685 for this set up but with the lamination scar I'm knocking it down $300 to $1,385

There are less than 25 of these guitars in the world - I have over a hundred hours into this one so it's about $6 an hour pay is why I probably will only build one more after this one - and that's a maybe. They are really hard to build but I Love the Tone.

SOLD

 

I always get a kick when I see a Melobar make it on stage on TV- Have to tip my hat to Denny Hemingson with Tim McGraw doing an excellent job with a Melobar Skreemr on the left!

Youtubevideo

M.Green get's the Green Dragon

 This guitar was to be the Green Dragon one of a kind but was thought it to be lost in the Hardway fire because it had been stained green and then black soot encased it; on a lark I started sanding and found the soot didn't stain into the open wood but left the green of the CnC carved fretboard looking almost iridescent, did a little more green alcohol stain and the grain popped on the body, shot a dozen clear coats and put about 30 hours into it and it is one of my favorite Tele-Ratt's headed out to Margaret Green owner of one of the original Melobar TeleRatts, She will have two one of a kind guitars like nothing we ever built before...kinda cool to have a player with one of the first and one of the last ever built.

Bruce's Tel-O-Bar

Finally after 70+ hours Bruce's Tel-O-Bar is born.

Very interesting guitar with the Tele on top then the Melobar neck is able to convert from 6 to 8 to a 10 string configuration.

Don't ask me to build another one though, I made less than $5 an hour on this one and the pain and stress is wayyyy too much, but it's cool to see this one make it into the world.